Geko Union/ Geko Fluid Control GmbH

Blog

12
09, 2022
Where is the Electric Triple Eccentric Butterfly Valve Mainly Suitable for Use?
At this stage, the electronically controlled triple eccentric butterfly valve is mainly aimed at a regulating machine for flow. At present, because the pressure loss of the butterfly valve in the pipe...
05
09, 2022
How to Choose the Valve in the Water Supply Network?
The water supply network is composed of various pipe accessories and fittings such as pipes and valves. According to various needs (water volume of the pipe network, scheduling and deployment of water...
16
08, 2022
How to Use Manual Ball Valve?
Stainless steel manual ball valve and gate valve are the same type of valve, the difference is that the closure is a sphere, and the sphere rotates around the center line of the valve body to reach an...
09
08, 2022
What Are the Structural Classifications of Gate Valves?
There are many different ways to classify the gate valve structure, the main difference is the different structural forms of the sealing elements used. According to the structure of the sealing elemen...
08
07, 2022
Gate Valve Installation and Maintenance Precautions
The handwheel, handle and transmission mechanism are not allowed to be used for lifting, and collision is strictly prohibited. Double-gate gate valves should be installed vertically (i.e. the stem is ...
01
07, 2022
The Working Principle and Advantages of Ball Valve
Ball valve and gate valve are the same type of valve, the difference is that its closing part is a sphere, and the sphere rotates around the center line of the valve body to achieve opening and closin...
22
06, 2022
Types of Control Valves and Applicable Conditions of Common Control Valves
According to different use requirements, there are many types of control valves, which can be divided into straight stroke and angular stroke according to the way the valve core moves; Diverter three-...
15
06, 2022
Maintenance Method of Key Inspection Parts of Control Valve
The control valve is the actuator in the automatic control system, and its application quality is directly reflected in the adjustment quality of the system. As a terminal element in process control, ...
08
06, 2022
Characteristics and Application of Control Valve
The control valve consists of two main assemblies: valve body assembly and actuator assembly (or actuator system), which are divided into four series: single-seat series control valve, double-seat ser...
01
06, 2022
Chemical Valve Selection Principle
Chemical valves are an important accessory for fluid control on industrial pipelines. Faced with various working conditions of complex industrial systems and a wide variety of valves, if you want to c...
20
05, 2022
Function and Design of Check Valve
1. The function of the check valve is to ensure that the fluid flows in one directionThe moving parts usually press against the valve seat to form a seal. A small pressure must be applied to the movin...
06
05, 2022
Classification and Working Principle of Butterfly Valve
Butterfly valve, also known as flap valve, is often used in pipelines for conveying various corrosive and non-corrosive fluid media in engineering systems such as generators, coal gas, natural gas, li...
20
04, 2022
What Are the Precautions for Installation and Maintenance of Butterfly Valves?
The butterfly valve opening and closing part is a disc-shaped butterfly plate, which rotates around its own axis in the valve body, so that the valve that can open, close or adjust is called a butterf...
06
04, 2022
What is the Difference Between Ball Valve and Butterfly Valve?
The biggest difference between the butterfly valve and the butterfly valve is that the opening and closing part of the butterfly valve is a plate, while the ball valve is a ball. Lifting motion; butte...
22
02, 2022
Stainless Steel Flange Ball Valve Installation Steps And Advantages
Introduction Of Installation Steps Of Stainless Steel Flanged Ball ValveWhen the valve is hoisted, the rope should not be tied to the handwheel or valve stem, so as not to damage these parts.
11
02, 2022
The Difference Between Knife Gate Valve And Gate Valve
There are many types of gate valves, and knife gate valve is one of them, also called knife style gate valve. Depending on the type of structure, gate valves can be divided into flat gate valves.
21
01, 2022
The Working Principle Of Electric Control Valve
Electric control valve is an important execution unit instrument in industrial automation process control. The structure is composed of an electric actuator and a regulating valve.
20
01, 2022
The Working Principle And Advantages Of Plug Valve
The plug valve uses a plug with a through hole as a valve for the opening and closing parts. The cock rotates with the valve stem to realize the opening and closing action.
13
01, 2022
Classification Of Ball Valves
The opening and closing part of the ball valve is a sphere with a circular channel, which rotates around an axis perpendicular to the channel, and the sphere rotates with the valve stem.
Recommended Valves for Sale